14
– Only use the Power Sprayer in good light and visibility conditions. Never use
the Power Sprayer at night. Do not use the Power Sprayer during rainfall or
immediately after rain (danger of injury through slipping and falling in wet
conditions).
– Beware of slippery and wet areas (ice and snow) as there is a danger of
slipping, and always ensure secure footing.
– Never use the Power Sprayer while standing on a ladder.
– Never climb a tree to use the Power Sprayer from the tree.
– Never use the Power Sprayer while standing on an unstable surface.
– Do not point the nozzle of the Power Sprayer towards people or animals.
Flying debris may cause serious injury.
– Do not touch the spark plug connector while the engine is running.
– Do not touch moving parts of the Power Sprayer while the engine is running.
– Do not touch the muffler or other engine parts during operation or for a period
after the engine has stopped. These engine parts are extremely hot and may
cause serious burns.
– Ensure that the toxicity of the pesticides or herbicides to be used is known
before use, and carefully read related use instructions to familiarize yourself
with the proper procedures for using the chemicals in question. If pesticides/
herbicides come in contact with your skin, immediately rinse the affected area
and thoroughly wash with soap. Firmly tighten the cap of the sprayer tank in
order to avoid chemical leaks.
If spray is interrupted, or force weakens, and/or engine suddenly starts to rev
high, the chemical tank is empty. Close spray valve, reduce engine revs, stop
engine, and then replenish chemical.
CAUTION: Before doing any work on the Power Sprayer, always stop the engine and pull the plug cap off the spark plug (see “checking the
spark plug”).
Always wear protective gloves!
To ensure a long service life and to avoid any damage to the equipment, the following servicing operations should be performed at regular
intervals.
Daily checkup and maintenance
– Before operation, check the machine for loose screws or missing parts.
– Before operation, always check for clogging of the cooling air passage and the cylinder fins.
Clean them if necessary.
– Perform the following work daily after use:
• Clean the Power Sprayer externally and inspect for damage.
• Clean the air filter. When working under extremely dusty conditions, clean the filter the severall times a day.
– Check the functioning of the I-O switch, the lock-off lever, the control lever, and the look button.
SERVICING INSTRUCTIONS
