Repair Manual EA6100P / EA6101P
20
14
15
16
17
1
2
12
13
11
08 CARBURETOR
Removing the carburetor base
Remove the insert
5
from the intake manifold
if necessary.
Detach the Bowden cable
11
.
Remove the carburetor
ange
10
from the
intake manifolds.
Remove the primer return line
12
from the
primer.
Unscrew 3 bolts
8
.
Lift the carburetor base slightly and pull the
rubber grommet
9
with the short-circuit cable
down and off.
Carefully remove the carburetor base while
letting the Bowden cable
11
and lines slide out
of the base.
Assembly
Assemble in reverse order.
Route the lines as shown.
Tighten bolts
8
to 5
+/-0.5
Nm.
Removing the manifold
ange
Unscrew 4 bolts
13
and remove the manifold
ange.
1
Pulse line
2
Fuel line (red)
4
Primer suction line (top primer
connection)
12
Primer return line (bottom primer
connection)
Note:
Check all lines for cracks and damage.
Any damaged lines must be replaced.
11
5
12
8
9
10
Intake diaphragm
(reed valve)
If the intake diaphragm
16
is damaged or
protruding away from the air hose
ange, it
must be replaced.
Note:
Turn the side with
TOP
on it to the
outside when assembling.
Tighten screw
17
to 3
+/-0.5
Nm.
Note:
After pushing the carburetor manifold
14
through the
ange, put in the insert
15
.
Tighten bolts
13
to 5
+/- 0.5
Nm.