9
ENGLISH
Installing the water ilter
Only for cloth ilter model (optional accessory)
CAUTION:
Never pick up water or wet dust
without the loat and the cloth ilter or the water
ilter.
CAUTION:
For picking up wet dust, make
sure that the loat cage and the loat are installed
on the cleaner.
CAUTION:
When installing the water ilter on
the tank, set it tight at the opening of the tank so
that the hook of the water ilter engages the tank
opening irmly and there is no space between the
water ilter and the tank.
To pick up water or wet dust only, the water ilter is more
suitable than the cloth ilter.
When installing the water ilter, align its mounting posi
-
tion mark with the one on the tank.
1
2
3
1.
Water ilter
2.
Tank
3.
Mounting position marking
NOTE:
It is recommended using water ilter when
picking up large amount of water repeatedly.
Otherwise vacuum ability may be reduced in case of
cloth ilter.
Installing the paper pack
Optional accessory
WARNING:
When using the paper pack, also
use the cloth ilter or preilter together that is
preinstalled on the tool.
Failure to use the cloth ilter
/ preilter together may cause unusual noise and heat,
resulting in a ire.
CAUTION:
(For the cloth ilter model)
•
Never pick up water or other liquids or wet
dusts when using the paper pack.
Picking
up such things may cause the paper pack
breakage.
•
Before using the paper pack, make sure that
powder ilter (optional accessory), damper
(optional accessory) and preilter are always
used together.
CAUTION:
(For the powder ilter model)
•
Before using the paper pack, make sure
that powder ilter, damper and preilter are
always used together.
1.
Remove the rubber holder.
1
1.
Rubber holder
2.
Extend the paper pack.
3.
Align the paper pack opening with the dust suction
opening of the cleaner.
4.
Insert the cardboard of the paper pack onto the
holder so that it is positioned at the end beyond the
detent protrusion.
1
2
1.
Paper pack
2.
Holder
