manualshive.com logo in svg

Makita DVC261Z, Инструкция по эксплуатации, Страница: 10 / 16

Поделиться
Скачать
Makita DVC261Z Скачать руководство пользователя страница 10

10 ENGLISH

Connecting the tool

NOTE:

 

If the bent pipe assembly is attached to the 

hose, remove it beforehand.

To connect a tool to the cleaner, the dedicated hose 

and/or additional parts are required. Depending on your 

cleaner model, you need to replace the hose and/or 

prepare additional parts.

Refer to the following table for details.

Supplied 

hose 

diameter

Hose end type

Action

ø28 mm

without part

Attach the front cuff.

with snap-on part

Replace the hose end 

(snap-on part) with the front 

cuff.

The hose end can be removed 

by turning it counterclockwise.

ø32 mm

with snap-on part

Replace the hose with the one 

for dust extraction (ø28 mm, 

with front cuff).

ø38 mm

with snap-on part

Replace the hose with the one 

for dust extraction (ø28 mm, 

with front cuff).

with front cuff 38

Attach the joint 22-38 or the 

front cuff 24.

NOTE:

 Always use a suitable front cuff. When using 

the front cuff 24, attach it to the front cuff 22 that is 

connected to the hose.

1

2

►    

1.

 Front cuff 22 

2.

 Front cuff 24

When using ø28 mm dust extraction 

hose

1.

 

Attach the front cuff to the hose for dust extraction. 

When connecting the front cuff, make sure that it is 

securely screwed on the hose.

2.

 

Connect the front cuff to the tool's extraction 

outlet.

2

1

1

3

►    

1.

 Front cuff 

2.

 Extraction outlet 

3.

 Hose

The front cuff can be detached by turning it counter-

clockwise while holding the hose.

Содержание DVC261Z

















Отзывы:

Нет отзывов