6
Model DUR362L
Type of handle
Loop handle
No load speed
3,500 - 6,600 min
-1
Overall length
1,840 mm
Applicable cutting tool
Nylon cutting head
Cutting diameter with nylon cutting head
300 mm
Rated voltage
D.C. 36 V
Net weight
5.1 kg
5.6 kg
Standard battery cartridge
BL1815N / BL1820 / 1820B
BL1830 / BL1830B / BL1840 / BL1840B /
BL1850 / BL1850B / BL1860B
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Noise
Sound pressure level average
Sound power level average
Model L
PA
(dB (A))
Uncertainty K
(dB (A))
L
WA
(dB (A))
Uncertainty K
(dB (A))
Applicable
standard
DUR361U
82 1.7 94 1.7
DUR362L
80 1.3 95 1.3
2000/14/EC
• Even if the sound pressure level listed above is 80 dB (A) or less, the level under working may exceed 80 dB (A). Wear ear
protection.
Vibration
Left hand
Right hand
Model a
h
(m/s
2
)
Uncertainty K
(m/s
2
)
a
h
(m/s
2
)
Uncertainty K
(m/s
2
)
Applicable
standard
DUR361U
2.5 1.5 2.5 1.5
DUR362L
2.5 1.5
2.5 1.5
EN786
ENG901-1
•
The declared vibration emission value has been
measured in accordance with the standard test method
and may be used for comparing one tool with another.
•
The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
•
The vibration emission during actual use of the power
tool can differ from the declared emission value
depending on the ways in which the tool is used.
•
Be sure to identify safety measures to protect the
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
For model DUR361U
END116-1
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･
Take particular care and attention.
･
Read instruction manual.
･
Danger; be aware of thrown objects.
･
The distance between the tool and
bystanders must be at least 15 m.
･
Keep bystanders away.
･
Keep distance at least 15 m.
･
Avoid
kickback.
･
Wear a helmet, goggles and ear
protection.
･
Wear protective gloves.
･
Wear sturdy boots with nonslip soles.
Steeltoed safety boots are recommended.
･
Do not expose to moisture.
･
Top permissible tool speed.
･
Only for EU countries
Do not dispose of electric equipment or
battery pack together with household
waste material!
In observance of the European Directives,
on Waste Electric and Electronic
Equipment and Batteries and Accumulators
Cd
Ni-MH
Li-ion
15m(50
FT
)
Та
ше
в
-
Га
лв
ин
г
ОО
Д
www.tashev-galving.com
