Controller
LED Warning lamp
Fig. D-6
DC motor
Switch
Terminal
Housing set (L)
Do not put AS Lead wire (
yellow
)
on the top layer of Lead wires
in these Lead wire holders.
Lead wire holder
Neither AS Lead wire (
yellow
) nor
Warning lamp’s Lead wires (
black
,
red
)
should be the top layer of all Lead wires
in this Lead wire holder.
Wiring in Housing L
See
Fig. D-3
for the wiring of
LED warning lamp
.
See
Figs. D-1 and D-2
for the wiring of
Terminal
.
See
Fig. D-5
for
the wiring of
Controller
.
P 9/ 9
W
iring diagram (cont.)
See
Fig. D-4
for the wiring of
DC motor
.
Housing L
Face its Wire connecting side to Housing L when setting Controller in place.
After setting Controller to Housing L,
the Lead wires have to be put so that
they do not cross over the joint which
accepts Housing R.
Controller
Fig. D-5
Wire connecting side
joint
