Makita DUH506Z Скачать руководство пользователя страница 6

6 ENGLISH

4. 

Do not use the tool in the rain or in wet or 

very damp conditions.

 The electric motor is not 

waterproof.

5. 

Make sure you have a secure footing before 

starting operation.

6. 

Do not operate the tool at no-load unnecessarily.

7. 

Immediately switch off the tool and remove the 

battery cartridge if the shear blades should 

come into contact with a fence or other hard 

object. Check the blades for damage, and if 

damaged, replace the blades immediately.

8. 

Before checking the shear blades, taking care 

of faults, or removing material caught in the 

shear blades, always switch off the tool and 

remove the battery cartridge.

9. 

Never point the shear blades to yourself or others.

10. 

If the blades stop moving due to the stuck of 

foreign objects between the blades during 

operation, switch off the tool and remove the 

battery cartridge, and then remove the foreign 

objects using tools such as pliers.

 Removing 

the foreign objects by hand may cause an injury 

for the reason that the blades may move in reac-

tion to removing the foreign objects.

Electrical and battery safety

1. 

Avoid dangerous environment. Don't use the 

tool in dump or wet locations or expose it to 

rain.

 Water entering the tool will increase the risk 

of electric shock.

2. 

Do not dispose of the battery(ies) in a fire.

 

The cell may explode. Check with local codes for 

possible special disposal instructions.

3. 

Do not open or mutilate the battery(ies).

 

Released electrolyte is corrosive and may cause 

damage to the eyes or skin. It may be toxic if 

swallowed.

4. 

Do not charge battery in rain, or in wet 

locations.

5. 

Do not charge the battery outdoors.

6. 

Do not handle charger, including charger plug, 

and charger terminals with wet hands. 

Maintenance and storage

1. 

Switch off the tool and remove the battery 

cartridge before doing any maintenance work.

2. 

When moving the tool to another location, 

including during work, always remove the 

battery cartridge and put the blade cover on 

the shear blades. Never carry or transport the 

tool with the blades running. Never grasp the 

blades with your hands.

3. 

Clean the tool and especially the shear blades 

after use, and before putting the tool into stor-

age for extended periods. Lightly oil the blades 

and put on the blade cover.

4. 

Store the tool with the blade cover on, in a dry 

room. Keep it out of reach of children. Never 

store the tool outdoors.

5. 

Do not dispose of the battery(ies) in a fire. The 

cell may explode. Check with local codes for 

possible special disposal instructions.

6. 

Do not open or mutilate the battery(ies). Released 

electrolyte is corrosive and may cause damage to 

the eyes or skin. It may be toxic if swallowed.

7. 

Do not charge battery in rain, or in wet 

locations.

SAVE THESE INSTRUCTIONS.

WARNING:

 

DO NOT let comfort or familiarity 

with product (gained from repeated use) replace 

strict adherence to safety rules for the subject 

product. MISUSE or failure to follow the safety 

rules stated in this instruction manual may cause 

serious personal injury.

Important safety instructions for 

battery cartridge

1. 

Before using battery cartridge, read all instruc-

tions and cautionary markings on (1) battery 

charger, (2) battery, and (3) product using 

battery.

2. 

Do not disassemble or tamper with the battery 

cartridge.

 It may result in a fire, excessive heat, 

or explosion.

3. 

If operating time has become excessively 

shorter, stop operating immediately. It may 

result in a risk of overheating, possible burns 

and even an explosion.

4. 

If electrolyte gets into your eyes, rinse them 

out with clear water and seek medical atten-

tion right away. It may result in loss of your 

eyesight.

5. 

Do not short the battery cartridge:

(1) 

Do not touch the terminals with any con-

ductive material.

(2) 

Avoid storing battery cartridge in a con-

tainer with other metal objects such as 

nails, coins, etc.

(3) 

Do not expose battery cartridge to water 

or rain.

A battery short can cause a large current 

flow, overheating, possible burns and even a 

breakdown.

6. 

Do not store and use the tool and battery car-

tridge in locations where the temperature may 

reach or exceed 50 °C (122 °F).

7. 

Do not incinerate the battery cartridge even if 

it is severely damaged or is completely worn 

out. The battery cartridge can explode in a fire.

8. 

Do not nail, cut, crush, throw, drop the battery 

cartridge, or hit against a hard object to the 

battery cartridge.

 Such conduct may result in a 

fire, excessive heat, or explosion.

9. 

Do not use a damaged battery.

10. 

The contained lithium-ion batteries are subject 

to the Dangerous Goods Legislation require-

ments. 

For commercial transports e.g. by third parties, 

forwarding agents, special requirement on pack-

aging and labeling must be observed. 

For preparation of the item being shipped, consult-

ing an expert for hazardous material is required. 

Please also observe possibly more detailed 

national regulations. 

Tape or mask off open contacts and pack up the 

battery in such a manner that it cannot move 

around in the packaging.

Содержание DUH506Z





















Отзывы: