12 ENGLISH
4.
Tighten 3 bolts using the hex wrench.
1
Fig.10
►
1.
Bolt
5.
Loosen 2 bolts, and then remove 1 bolt.
1
Fig.11
►
1.
Bolt
6.
Loosen the lock ring by turning the lock ring coun
-
terclockwise, then extend the pipe approximately 10
cm (3-15/16″) or more, and then tighten the lock ring by
turning the lock ring clockwise.
1
2
3
Fig.12
►
1.
Lock ring
2.
10 cm (3-15/16″) or more
3.
Pipe
7.
Insert the pipe into the head of the tool all the way,
and then align the hole on the pipe with the hole on the
head of the tool.
1
2
Fig.13
►
1.
Hole
2.
Pipe
8.
Tighten 2 bolts using the hex wrench.
1
Fig.14
►
1.
Bolt
Removing or installing saw chain
CAUTION:
The saw chain and the guide bar
are still hot just after the operation. Let them cool
down enough before carrying out any work on
the tool.
CAUTION:
Carry out the procedure of install-
ing or removing saw chain in a clean place free
from sawdust and the like.
