background image

2

20 cm (7-7/8")

1

1

2

3

4

5

OFF

ON

*Keep the room bright when performing mapping.

Precautions to prevent the robotic cleaner from falling

CAUTION

Using the Robotic Cleaner in a Factory or Warehouse 

BL1830 ×2 … 600 m

2

BL1830 ×2 … 300 m

2

BL1860 ×2 … 1200 m

2

BL1860 ×2 … 600 m

2

x2

Put away the following.

Battery workload (approximate)

Battery workload (approximate)

Long, thin objects.

Easily-snagged objects.

Peeling

Tears

Secure carts and other equipment 

so that they do not move.

Check the magnetic boundary 

line.

Water droplets, etc.

If cleaning only visible debris, the 

operation time can be extended by turning 

off the vacuum fan.

In large spaces, you can clean more 

efficiently by dividing the space using a 

magnetic boundary line (sold separately) or 

obstacles with a height of 25 cm (9-7/8") or 

more. You can also use the app to limit the 

cleaning area.

Registration of room information (mapping) 

may fail in large spaces with no obstructions 

within 11 m (36.09 ft) around the robotic 

cleaner. Operate in free cleaning mode.

Free cleaning mode can be operated if there 

is an obstacle within a 18 m (59.06 ft) radius 

from the robotic cleaner.

Place obstacles in front of gaps that are 

approximately the same height as the robotic 

cleaner.

Place obstacles in front of equipment with controls at 

about the same height as the robotic cleaner, or 

change the location of the controls.

When you have performed mapping, setting 

continuous cleaning in the app will allow the 

robotic cleaner to start continuing from the 

previous cleaning if it stopped before 

cleaning the entire area due to insufficient 

battery power.

If it is wet, wipe it off. If it is peeling or torn, 

replace it.

We recommend stick the magnetic boundary 

line to secure it.

(3229 sq ft)

(6458 sq ft)

(6458 sq ft)

(12917 sq ft)

● If the cliff sensors are dirty or have water droplets attached due to condensation or the like, wipe them clean.
● Place obstacles with a height of 25 cm (9-7/8") or more (objects that will not move or fall over if hit by the robotic

cleaner) in areas where the robotic cleaner may fall and cause an accident.

● Refrain from using robotic cleaner on a mezzanine floor, a loft, a stairwell, a high location without walls, or a place

with a slope of 10° or more.

MAKITA CORPORATION | makita.ca | 1950 FORBES STREET, WHITBY, ON. L1N 7B7

   

Отзывы: