P 9 / 9
W
iring diagram
Fig. D-4
Route Choke coil lead wire (orange)
between Rib F and the inner wall in
Switch side. (when using Choke coil)
Rib F
Rib H
Rib G
Boss
Sheath of Power
supply cord
Do not put any Lead
wires on Rib G.
Do not put any Lead
wires on Rib H.
Fix Choke coil’s lead wires (purple)
in Lead wire holder.
Rib E
line (Z)
Noise suppressor
Do not put any Lead
wires on this Boss.
Choke coil with
Lead wire (orange)
Choke coil with
Lead wire (purple)
Route Choke coil’s lead wires (purple)
between Rib E and the inner wall.
Wiring in Housing set (L)
Put Noise suppressor under Lead wires of Power supply
cord as shown on the left. (when using Noise suppressor)
The end of Sheath should not be crossed
over the line (Z) toward Switch.
Route Field lead wires
(black) through Lead
wire holders without
crossing each other.
Put Choke coil with Lead
wire (purple) in the position
shown on the left.
(when using Choke coil)
