12
Software version
1. With your radio switched on, press the Advanced
setting button to access the menu for the current mode.
2. Rotate the Tuning control knob to select “Software
Version”. Press the Tuning control knob to display the
software version.
Equalizer function
There are 7 kinds of color LED indicators around the
Tuning control knob to indicate different EQ modes.
1. Press the Power button to switch on your radio.
2. Press the EQ control button to enter the EQ setting
menu.
3. Rotate the Tuning control knob to select your required
mode. Then press the Tuning control knob to confirm
the selection.
EQ mode
LED indicator
Flat
White
Jazz
Blue
Rock
Red
Classic
Brown
Pop
Pink
News
Yellow
MY EQ
Green
Set up My EQ profile
1. Press the EQ control button to enter the EQ setting
menu.
2. Rotate the Tuning control knob to select “MY EQ
Setup”. Then press the Tuning control knob to enter the
setting menu.
3. Rotate the Tuning control knob to select “Treble”
setting. Press the Tuning control knob to enter the
setting. Rotate the Tuning control knob to select your
required treble level. Press the Tuning control knob to
confirm the setting.
4. Rotate the Tuning control knob to select “Middle”
setting. Press the Tuning control knob to enter the
setting. Rotate the Tuning control knob to select your
required middle level. Press the Tuning control knob to
confirm the setting.
5. Rotate the Tuning control knob to select “Bass” setting.
Press the Tuning control knob to enter the setting.
Rotate the Tuning control knob to select your required
bass level. Press the Tuning control knob to confirm the
setting.
Note:
When using the equalizer to emphasize the bass and
listening at high volume levels, it may cause sound
cracking and distortion. In this case, adjust the radio
volume appropriately.
LISTENING TO MUSIC VIA
BLUETOOTH STREAMING
You need to pair your Bluetooth device with the radio
before you can auto-link to play/stream Bluetooth music
through the radio. Pairing creates a ‘bond’ so two devices
can recognize each other.
Note:
●
To have the better sound quality, we recommend
setting the volume to more than two-thirds level on your
Bluetooth device and then adjust the volume on the
radio as required.
●
The radio can memorize up to 8 sets of paired device,
when the memory exceed this amount, the oldest
pairing history will be over written.
Pairing your Bluetooth device for the
first time
1. Press the Power button to turn on the radio. Press the
Band button to select Bluetooth mode. The display will
appear “BT Pair” and the Preset buttons (1-5) flash
white light to show the radio is discoverable.
2. Activate Bluetooth on your device according to the
device’s user manual to link to the radio. Locate the
Bluetooth device list and select the device named
“DMR115” (With some mobiles which are equipped
with earlier versions than BT2.1 Bluetooth device, you
may need to input the pass code “0000”).
3.
Once connected, there will be a confirmation tone
sound. The Preset buttons (1-5) will remain in solid
white. You can simply select and play any music from
your source device. Volume control can be adjusted
from your source device, or directly from the radio.
4. Use the controls on your Bluetooth-enabled device or
on the radio to play/pause and navigate tracks.
Note:
● If 2 Bluetooth devices, pairing for the first time, both
search for the radio, it will show its availability on both
devices. However, if one device links with this unit first,
then the other Bluetooth device won’t find it on the list.
●
If your Bluetooth device is temporarily disconnected to
the radio, then you need to manually reconnect your
device again to the radio.
●
If “DMR115” shows in your Bluetooth device list but
your device cannot connect with it, please delete the
item from your list and pair the device with the radio
again following the steps described previously.
●
Optimum Bluetooth streaming range is roughly 10
meters (30 feet) (line of sight) to the radio but distance
up to 30 meters (100 feet) are possible.
●
If Bluetooth connection is lost due to exceeding time of
separation, exceeding the optimum distance, obstacles
or otherwise, reconnecting your device with the radio
may be necessary.
