13
ENGLISH
(Original instructions)
Explanation of general view
1
Stopper pin
2
Bolt
3
Adjusting bolt
4
Red part
5
Button
6
Battery cartridge
7
Star marking
8
Blade guard
9
Blade guard A
10 Blade guard B
11 Thumb screw
12 Kerf board
13 Saw blade
14 Blade teeth
15 Left bevel cut
16 Straight cut
17 Guide fence
18 Turn base
19 Top surface of turn table
20 Periphery of blade
21 Adjusting screw
22 Stopper arm
23 Sub-fence
24 Pointer
25 Miter scale
26 Lock lever
27 Grip
28 Lever
29 Release button
30 Bevel scale
31 Arm
32 Screw
33 Switch trigger
34 Lock-off button
35 Hole for padlock
36 Wrench holder
37 Hex wrench
38 Center cover
39 Hex wrench
40 Hex socket bolt
41 Safety cover
42 Shaft lock
43 Arrow
44 Blade case
45 Hex socket bolt (left-handed)
46 Outer flange
47 Inner flange
48 Spindle
49 Dust bag
50 Dust nozzle
51 Fastener
52 Support
53 Vise arm
54 Vise rod
55
Holder
56
Holder assembly
57
Vise knob
58
Projection
59
Vise shaft
60
Base
61
Rod 12
62
Clamp screw
63
52/38° type crown molding
64
45° type crown molding
65
45° type cove molding
66
Inside corner
67
Outside corner
68
Over 15 mm (5/8")
69
Over 420 mm (16-1/2")
70
Holes
71
Set plate
72
Cut grooves with blade
73
Triangular rule
74
Arm holder
75
0° bevel angle adjusting bolt
76
Left 45° bevel angle adjusting
bolt
77
Limit mark
78
Brush holder cap
79
Screwdriver
SPECIFICATIONS
Model
DLS713
Blade diameter ................................................................................................................................................... 190 mm
Blade body thickness ........................................................................................................................... 1.3 mm – 2.0 mm
Hole (arbor) diameter ............................................................................................................................................ 20 mm
Max. Miter angle .................................................................................................................................. Left 47°, Right 57°
Max. Bevel angle ................................................................................................................................... Left 45°, Right 5°
Max. Cutting capacities (H x W) with blade 190 mm in diameter.
No load speed (min
–1
) ............................................................................................................................................ 2,200
Dimensions (L x W x H) .....................................................................................................655 mm x 430 mm x 454 mm
Net weight ............................................................................................................................................................ 12.7 kg
Rated voltage .................................................................................................................................................... D.C. 18 V
(Note)
* mark indicates that a wood facing with the following thickness is used.
1: When using a wood facing 20 mm thickness.
2: When using a wood facing 15 mm thickness.
3: When using a wood facing 10 mm thickness.
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Miter angle
Bevel angle
45° (left)
0°
5° (right)
0°
25 mm x 300 mm
52 mm x 300 mm
40 mm x 300 mm
—
*60 mm x 265 mm (Note 1)
—
45° (left and right)
25 mm x 212 mm
52 mm x 212 mm
—
—
*60 mm x 185 mm (Note 2)
—
57° (right)
—
52 mm x 163 mm
—
—
*60 mm x 145 mm (Note 3)
—
