4-2
DC motor
4-2-1
Disassembling
Fig. 4-2-1-5
[7] Shift Change lever to the position of Cutting height
between 40 and 60mm.
Fig. 4-2-1-1
[1] Remove Blade 430.
[2] Pull Lock lever.
[3] Turn Battery cover complete.
Fig. 4-2-1-2
[4] Remove Battery cover complete by releasing Battery
cover complete from the hinges.
Lock lever
Battery cover
complete
Battery cover
complete
Hinge
Fig. 4-2-1-3
[5] Loosen two 5x25 Tapping screws, and remove Grip A.
Fig. 4-2-1-4
[6] Loosen seven 4x18 Tapping screws.
5x25 Tapping
screw (2 pcs.)
Grip A
Cowling
4x18 Tapping
screw (7 pcs.)
Change lever
Terminal
housing set
Fig. 4-2-1-6
[8] Pass Terminal housing through the square hole of
Cowling without disconnecting the lead wires as shown
below. Cowling can be removed.
Change lever
Square hole of
Cowling
Cowling
Terminal housing
7 / 21
