![background image](http://html1.mh-extra.com/html/makita/dhs630zj/dhs630zj_instruction-manual_4075531006.webp)
6
ENGLISH (Original instructions)
Explanation of general view
SPECIFICATIONS
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heaviest
combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of residence.
WARNING:
•
Only use the battery cartridges and chargers listed above.
Use of any other battery cartridges and chargers may
cause injury and/or fire.
Intended use
ENE028-1
The tool is intended for performing lengthways and
crossways straight cuts and mitre cuts with angles in
wood while in firm contact with the workpiece.
General power tool safety
warnings
GEA010-2
WARNING: Read all safety warnings, instructions,
illustrations and specifications provided with this
power tool.
Failure to follow all instructions listed below
may result in electric shock, fire and/or serious injury.
Save all warnings and
instructions for future reference.
The term “power tool” in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
CORDLESS CIRCULAR SAW
SAFETY WARNINGS
GEB151-1
Cutting procedures
1.
DANGER: Keep hands away from cutting area
and the blade. Keep your second hand on
auxiliary handle, or motor housing.
If both hands
are holding the saw, they cannot be cut by the blade.
1.
Red indicator
2.
Button
3.
Battery cartridge
4.
Star marking
5.
Indicator lamps
6.
Check button
7.
Lever
8.
Wing screw
9.
Cutting line
10. 45° position
11. 0° position
12. Screw
13. Top guide
14. Switch trigger
15. Lock-off lever
16. Light
17. Shaft lock
18. Hex wrench
19. Loosen
20. Hex bolt
21. Outer flange
22. Saw blade
23. Inner flange
24. Dust nozzle
25. Thumb screw
26. Hose
27. Vacuum cleaner
28. Clamp lever
29. Rip fence (Guide rule)
30. Adjusting screw
31. Triangular rule
32. Base
33. Limit mark
34. Brush holder cap
35. Screwdriver
Model
DHS630
Blade diameter
165 mm
Max. Cutting depth
at 90°
66 mm
at 45°
46 mm
No load speed (min
-1
)
3,100
Overall length
346 mm
Net weight
3.0 - 3.4 kg
Rated voltage
D.C. 18V
Battery cartridge
BL1815N/BL1820/BL1820B/BL1830/BL1830B/BL1840/BL1840B/BL1850/
BL1850B/BL1860B
Charger
DC18RC/DC18RD/DC18RE/DC18SD/DC18SE/DC18SF
Содержание DHS630ZJ
Страница 2: ...2 1 000157 1 2 000154 3 000156 4 000194 5 000147 6 000029 7 012093 8 012128 1 2 3 4 ...
Страница 3: ...3 9 015659 10 012098 11 012100 12 012107 13 012105 14 012106 5 6 7 8 9 10 11 12 13 14 15 16 ...
Страница 5: ...5 23 012103 24 012101 25 001145 26 012114 31 22 A B 32 12 22 33 34 35 ...