![background image](http://html2.mh-extra.com/html/makita/dhp480/dhp480_technical-information_4286183006.webp)
P
6
/ 1
2
When handling or storing multiple Rotors, be sure to keep a proper distance between Rotors as shown in
Fig. 9A
because Rotor is a strong magnet, failure to follow this instruction could result in:
•
Finger injury caused by pinching between Rotors pulling each other
•
Magnetic loss of Rotors or damage on the magnet portion of Rotor. (
Fig. 9B
)
Fig. 9A
Fig. 9B
* Magnetic loss of Rotors
* Damage on the magnet portion of Rotor
1. Put Leaf spring in place as drawn below.
(1) Pass Rotor into Stator complete as drawn in
Fig. 10
.
(2) Mount Leaf spring to Housing L, and join Gear assembly with Motor section. (
Fig. 11
)
Caution for Handling of Rotor
ASSEMBLING
Leaf spring
Fig. 10
Fig. 11
1. Holding Stator complete on a workbench, slowly insert Rotor
in Stator complete until Rotor’s drive end reaches the workbench.
2. When the drive end of Rotor
reaches the workbench, lift up
Stator complete slowly.
Rotor
Stator complete
Gear
assembly
2. Before pushing Rotor section (Rotor and Stator) fully
in Gear assembly, make sure that Rotor’s gear engages
with the super gears of Gear assembly to rotate them
smoothly.
Motor section
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -2. Rotor, Gear assembly (cont.)