![background image](http://html.mh-extra.com/html/makita/dhg180/dhg180_instruction-manual_230349009.webp)
9 ENGLISH
Shape and
description
Example
Reduction nozzle
For heating concen-
trated over small
area
Paint stripping with the scraper (optional
accessory)
Overlap welding
nozzle
(
Optional
accessory
)
Patching a vinyl sheet with the pressure
roller (optional accessory)
Solder sleeves
reflector
(
Optional
accessory
)
Heat shrinking for heat shrink tubes
Welding nozzle
(
Optional
accessory
)
For heating concentrated over small area
WARNING:
Ensure the power tool is switched
off and battery cartridge is removed from the
power tool before attaching the accessories.
Attaching the accessories with switch on or battery
cartridge attached may cause the risk of accidents.
WARNING:
Make sure to attach the accesso-
ries securely.
Otherwise the accessory may fall off
accidently and cause burn injury.
Detaching the accessory
Turn the front cover in the direction of the arrow in the illustra-
tion, the accessory will be ejected. This allows you to remove
nozzles without touching them while they are still hot.
►
Fig.2
WARNING:
Do not touch the accessory attached to or
ejected from the heat gun immediately after use. Do not eject
the accessory to any person or animal.
The nozzle attachment
gets extremely hot after use and cause risk burn injury.
WARNING:
Do not eject the accessory to any surface
that is flammable or easy to be melt.
The nozzle attachment gets
extremely hot after use and cause risk of fire or melting the surface.
WARNING:
Use the identical accessories included
in the original package or serviced by the dealer or service
center.
Use wrong or defective accessory may cause the hot
air to flow backward and damage the tool and create a hazard.
Installing or removing battery
cartridge
CAUTION:
Always switch off the tool before
installing or removing of the battery cartridge.
CAUTION:
Hold the tool and the battery cartridge
firmly when installing or removing battery cartridge.
Failure to hold the tool and the battery cartridge firmly may
cause them to slip off your hands and result in damage to
the tool and battery cartridge and a personal injury.
►
Fig.3:
1.
Red indicator
2.
Button
3.
Battery cartridge
To remove the battery cartridge, slide it from the tool
while sliding the button on the front of the cartridge.
To install the battery cartridge, align the tongue on the
battery cartridge with the groove in the housing and slip
it into place. Insert it all the way until it locks in place
with a little click. If you can see the red indicator as
shown in the figure, it is not locked completely.
CAUTION:
Always install the battery cartridge
fully until the red indicator cannot be seen.
If not,
it may accidentally fall out of the tool, causing injury to
you or someone around you.
CAUTION:
Do not install the battery cartridge
forcibly.
If the cartridge does not slide in easily, it is
not being inserted correctly.
OPERATION
NOTE:
At first use of the heat gun, some smoke may emit
from the nozzle. This is normal and will soon decrease.
Switching On and Off
Switching On
— Pull the lock off lever downwards and pull in the
switch trigger to switch on tool.
— Press in the lock on button on the left with your
thumb to keep the tool running.
Switching Off
— Release the switch trigger to stop.
— To stop the tool from the locked position, pull the
switch trigger fully to unlock. Release the switch
trigger to stop.
►
Fig.4:
1.
Lock off lever
2.
Switch trigger
3.
Lock on
button
Содержание DHG180
Страница 3: ...3 Fig 8 1 2 Fig 9 ...
Страница 147: ...147 ...