14
ENGLISH
1
2
►
1.
Screw
2.
Lever
To remove wheel guard, follow the installation proce
-
dure in reverse.
Installing or removing depressed
center wheel or lap disc
Optional accessory
WARNING:
When using a depressed center
wheel or lap disc, the wheel guard must be itted
on the tool so that the closed side of the guard
always points toward the operator.
CAUTION:
Make sure that the mounting part
of the inner lange its into the inner diameter of
the depressed center wheel / lap disc perfectly.
Mounting the inner lange on the wrong side may
result in the dangerous vibration.
Mount the inner lange onto the spindle.
Make sure to it the dented part of the inner lange onto
the straight part at the bottom of the spindle.
Fit the depressed center wheel / lap disc on the inner
lange and screw the lock nut onto the spindle.
1
2
4
3
►
1.
Lock nut
2.
Depressed center wheel
3.
Inner
lange
4.
Mounting part
To tighten the lock nut, press the shaft lock irmly so
that the spindle cannot revolve, then use the lock nut
wrench and securely tighten clockwise.
1
2
►
1.
Lock nut wrench
2.
Shaft lock
To remove the wheel, follow the installation procedure
in reverse.
Installing or removing lex wheel
Optional accessory
WARNING:
Always use supplied guard when
lex wheel is on tool.
Wheel can shatter during use
and guard helps to reduce chances of personal injury.
1
2
3
4
►
1.
Lock nut
2.
Flex wheel
3.
Back up pad
4.
Inner
lange
Follow instructions for depressed center wheel but also
use back up pad over wheel. See order of assembly on
accessories page in this manual.