24 / 35
Symptom
Probable Cause
Corrective Action
The continuous noise of the clutch
works are recognized.
Abnormal noise comes from the
machine even after Gear
assembly is removed.
Connect Connectors.
Replace Sensor circuit.
Part(s) of the clutch section are
broken or worn out.
Replace Clutch assembly.
Replace Controller.
The machine is in an overload
work.
(LED indicator lights up in red or
blinks alternately in red and green.)
Check the machine limit capacity.
Clutch is broken.
Replace Rotor.
Rotor is broken.
Connectors of Sensor circuit on
Gear assembly section are
disconnected.
Controller is broken.
Replace Clutch assembly.
The machine keeps rotating even
after the clutch works.
Sensor circuit is broken.
(Sensor circuit is broken,
Connector or Lead wires are
broken)
Clutch does not work. (LED
indicator does not light up in
green)
Controller is broken.
Replace Controller.
