8 ENGLISH
4.
Pass the strip through the loop on the fan unit and
fasten the snap button.
1
►
1.
Strip
5.
Attach the other fan unit to the jacket in the same way.
6.
Connect the power cable to the fan units. Support
the cable using the cable holder.
For model DFJ216
2
1
►
1.
Power cable
2.
Cable holder
For model DFJ416
1
2
3
►
1.
Power cable
2.
Hole
3.
Cable holder
NOTICE:
Always connect the power cable to
both of the fan units.
The fan does not operate if the
power cable is connected to one fan unit only.
7.
(For DFJ416 only)
Close the zip fastener after installing or removing the
fan unit.
8.
Connect the other end of the power cable to the
battery holder.
1
►
1.
Battery holder
CAUTION:
Always use the strip and snap
button to secure the fan unit to the jacket.
If the
fan unit falls, it may cause an injury, or damage to the
fan unit.
Follow the installation procedure in reverse when
removing it.
Attaching the filter set
Optional accessory
The filter set protects the fan unit from dust and powder.
We recommend that you use the filter set in a dusty or
powdery work place.
Insert the filter attachment between the jacket and fan
unit as shown in the figure.
1
2
3
4
5
►
1.
Ring
2.
Hole in the jacket
3.
Filter attachment
4.
Fan unit
5.
Filter
