background image

4 ENGLISH

It is an employer's responsibility to enforce 

the use of appropriate safety protective equip-

ments by the tool operators and by other per-

sons in the immediate working area.

Power tool use and care

1. 

Do not force the power tool. Use the correct 

power tool for your application.

 The correct 

power tool will do the job better and safer at the 

rate for which it was designed.

2. 

Do not use the power tool if the switch does not turn 

it on and off.

 Any power tool that cannot be controlled 

with the switch is dangerous and must be repaired.

3. 

Disconnect the plug from the power source 

and/or remove the battery pack, if detachable, 

from the power tool before making any adjust-

ments, changing accessories, or storing power 

tools.

 Such preventive safety measures reduce 

the risk of starting the power tool accidentally.

4. 

Store idle power tools out of the reach of chil-

dren and do not allow persons unfamiliar with 

the power tool or these instructions to operate 

the power tool.

 Power tools are dangerous in the 

hands of untrained users.

5. 

Maintain power tools and accessories. Check for 

misalignment or binding of moving parts, breakage 

of parts and any other condition that may affect the 

power tool’s operation. If damaged, have the power 

tool repaired before use.

 Many accidents are caused 

by poorly maintained power tools.

6. 

Keep cutting tools sharp and clean.

 Properly 

maintained cutting tools with sharp cutting edges 

are less likely to bind and are easier to control.

7. 

Use the power tool, accessories and tool bits etc. 

in accordance with these instructions, taking into 

account the working conditions and the work to be 

performed.

 Use of the power tool for operations different 

from those intended could result in a hazardous situation.

8. 

Keep handles and grasping surfaces dry, clean 

and free from oil and grease.

 Slippery handles 

and grasping surfaces do not allow for safe handling 

and control of the tool in unexpected situations.

9. 

When using the tool, do not wear cloth work 

gloves which may be entangled.

 The entangle-

ment of cloth work gloves in the moving parts may 

result in personal injury.

Battery tool use and care

1. 

Recharge only with the charger specified by 

the manufacturer.

 A charger that is suitable for 

one type of battery pack may create a risk of fire 

when used with another battery pack.

2. 

Use power tools only with specifically desig-

nated battery packs.

 Use of any other battery 

packs may create a risk of injury and fire.

3. 

When battery pack is not in use, keep it away 

from other metal objects, like paper clips, 

coins, keys, nails, screws or other small metal 

objects, that can make a connection from one 

terminal to another.

 Shorting the battery termi

-

nals together may cause burns or a fire.

4. 

Under abusive conditions, liquid may be ejected 

from the battery; avoid contact. If contact acci-

dentally occurs, flush with water. If liquid contacts 

eyes, additionally seek medical help.

 Liquid ejected 

from the battery may cause irritation or burns.

5. 

Do not use a battery pack or tool that is dam-

aged or modified.

 Damaged or modified batteries 

may exhibit unpredictable behaviour resulting in 

fire, explosion or risk of injury.

6. 

Do not expose a battery pack or tool to fire or 

excessive temperature.

 Exposure to fire or tem

-

perature above 130 °C may cause explosion.

7. 

Follow all charging instructions and do not charge 

the battery pack or tool outside the temperature 

range specified in the instructions.

 Charging improp-

erly or at temperatures outside the specified range may 

damage the battery and increase the risk of fire.

Service

1. 

Have your power tool serviced by a qualified 

repair person using only identical replacement 

parts.

 This will ensure that the safety of the power 

tool is maintained.

2. 

Never service damaged battery packs.

 Service 

of battery packs should only be performed by the 

manufacturer or authorized service providers.

3. 

Follow instruction for lubricating and chang-

ing accessories.

Cordless driver drill safety warnings

1. 

Use auxiliary handle(s), if supplied with the 

tool.

 Loss of control can cause personal injury.

2. 

Hold power tool by insulated gripping sur-

faces, when performing an operation where the 

cutting accessory may contact hidden wiring.

 

Cutting accessory contacting a "live" wire may 

make exposed metal parts of the power tool "live" 

and could give the operator an electric shock.

3. 

Hold power tool by insulated gripping sur-

faces, when performing an operation where 

the fastener may contact hidden wiring.

 

Fasteners contacting a "live" wire may make 

exposed metal parts of the power tool "live" and 

could give the operator an electric shock.

4. 

Always be sure you have a firm footing. Be sure no 

one is below when using the tool in high locations.

5. 

Hold the tool firmly.

6. 

Keep hands away from rotating parts.

7. 

Do not leave the tool running. Operate the tool 

only when hand-held.

8. 

Do not touch the drill bit or the workpiece 

immediately after operation; they may be 

extremely hot and could burn your skin.

9. 

Some material contains chemicals which may 

be toxic. Take caution to prevent dust inhala-

tion and skin contact. Follow material supplier 

safety data.

10. 

If the drill bit cannot be loosened even you 

open the jaws, use pliers to pull it out.

 In such a 

case, pulling out the drill bit by hand may result in 

injury by its sharp edge.

SAVE THESE INSTRUCTIONS.

WARNING:

 

DO NOT let comfort or familiarity 

with product (gained from repeated use) replace 

strict adherence to safety rules for the subject 

product. MISUSE or failure to follow the safety 

rules stated in this instruction manual may cause 

serious personal injury.

Содержание DF333DWAE













Отзывы: