manualshive.com logo in svg
background image

4 ENGLISH

NOTICE:

 

The battery charger is for charging Makita-battery cartridge. Never use it for other purposes or 

for other manufacturer’s batteries.

NOTE:

 If the charging light flashes slowly in blue color, charging may not start due to the condition of the battery 

cartridge as below:
—  Battery cartridge from just-operated tool or battery cartridge that has been left in a location exposed to direct 

sunlight for a long time.

—  Battery cartridge that has been left for a long time in a location exposed to cold air.

NOTE:

 When the battery cartridge is too hot, charging does not begin until the battery cartridge temperature 

reaches the degree at which charging is possible.

NOTE:

 If the charging light changes to red color, charging is not possible. The terminals on the charger or battery 

cartridge are clogged with dust or the battery cartridge is worn out or damaged.

Changing melody upon completion of charging

1. 

Inserting the battery cartridge into charger brings out last preset brief melody sound of completed charging.

2.  Removing and re-inserting it within five seconds after this action makes the melody sound change.
3.  Every time removing and re-inserting it within another five seconds after this, the melody sound changes in 

order.

4. 

When the desired melody sound comes out, leave the battery cartridge being inserted and the charge will 

begin. When a “short beep” mode is selected, no completed charging signals comes out. (Silent Mode)

5.  With finish of charge, the charging light will light up in green and the melody sound preset at the insertion of 

battery cartridge or buzzer sound (a long beep) comes out to notify completion of charge. (In selected silent 

mode, no sounds come out.)

6. 

Preset melody sound remains stored even when the charger is unplugged.

Cooling system

This charger is equipped with cooling fan for heated 

battery in order to enable the battery to prove its own 

performance. Sound of cooling air comes out during 

cooling, which means no trouble on the charger.
Blue and red light will flash alternately for warning in the 

following cases.
• 

Trouble on cooling fan

• 

Incomplete cool down of battery, such as, being 

clogged with dust

The battery can be charged in spite of the alternate blue 

and red light. But the charging time will be longer than 

usual in this case. Check the sound of cooling fan, vent 

on the charger and battery, which can be sometime 

clogged with dust.
Always keep clean the vent on charger and battery for 

cooling.

2

1

1

►    

1.

 Exhaust vent 

2.

 Intake vent

NOTE:

 The cooling system is in order although no 

sound of cooling fan comes out, if the blue and red 

light will not flash.

NOTE:

 The products should be sent to repair or 

maintenance, if the blue and red light flashes alter-

nately so often.

Содержание DC40RA









Отзывы: