Makita DBN500ZJ, Инструкция по эксплуатации, Страница: 4 / 64

4
ENGLISH (Original instructions)
Explanation of general view
1-1. Red indicator
1-2. Button
1-3. Battery cartridge
2-1. Battery indicator
3-1. Star marking
4-1. Indicator lamps
4-2. CHECK button
5-1. Trigger lock
5-2. Press to Lock position
5-3. Press to Free position
6-1. Mode selecting button
6-2. Sequential mode
6-3. Continuous mode
7-1. Adjuster
8-1. Lamp
8-2. Trigger
8-3. Driver guide (contact element) 9-1. Lock lever
9-2. Slide door
9-3. Driver guide
9-4. Magazine
10-1. Nails
10-2. Slide door
10-3. Driver guide
11-1. Nose adapter
11-2. Protrusion
11-3. Center plate
11-4. Holder
13-1. Groove
13-2. Hook
13-3. Screw
14-1. Hex wrench
15-1. Place the contact element against
workpiece.
15-2. Pull the trigger
16-1. Pull the trigger
16-2. Place the contact element against
workpiece.
17-1. Hex bolt A
17-2. Hex bolt B
17-3. Hex bolt C
17-4. Driver guide cover
18-1. Hex bolt
19-1. Pusher
19-2. Sleeve
19-3. Spring (large)
19-4. Spring (small)
19-5. Stopper
19-6. Slide door
SPECIFICATIONS
Model DBN500
Brad nail size 18 Ga x 15, 20, 25, 30, 32, 35, 38, 40, 45, 50 mm
Brad nail magazine capacity 100 pcs.
Dimensions (L x W x H) 294 mm x 97 mm x 318 mm
Rated voltage D.C. 18 V
Net weight 3.3 kg 3.5 kg
Standard battery cartridges
BL1815 / BL1815N / BL1820 /
BL1820B
BL1830 / BL1830B / BL1840 / BL1840B /
BL1850 / BL1850B / BL1860B
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
END311-1
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･
Read instruction manual.
･
Wear safety glasses.
･
Do not use on scaffoldings, ladders.
･
Keep fingers away from trigger when
not driving fasteners to avoid accidental
firing.
･
Only for EU countries
Do not dispose of electric equipment or
battery pack together with household
waste material!
In observance of the European
Directives, on Waste Electric and
Electronic Equipment and Batteries and
Accumulators and Waste Batteries and
Accumulators and their implementation
in accordance with national laws,
electric equipment and batteries and
battery pack(s) that have reached the
end of their life must be collected
separately and returned to an
environmentally compatible recycling
facility.
ENE073-1
Intended use
The tool is intended for fastening on interior work and
furniture work.
ENG905-1
Noise
The typical A-weighted noise level determined
according to EN60745:
Sound pressure level (L
pA
) : 79 dB (A)
Uncertainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB (A).
Wear ear protection
Cd
Ni-MH
Li-ion