Makita BUC250C Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 16

Makita BUC250C Скачать руководство пользователя страница 15

15

1

2

010929

Use a screwdriver to remove the brush holder caps. Take
out the worn carbon brushes, insert the new ones and
secure the brush holder caps.

Storing tool

Clean the tool before storing. Remove any chips and
sawdust from the tool after removing the sprocket cover.
After cleaning the tool, run it under no load to lubricate
the saw chain and guide bar.
Cover the guide bar with the scabbard.
Remove oil from the oil tank to empty it and place the
chain saw.
To maintain product SAFETY and RELIABILITY, repairs,
any other maintenance or adjustment should be
performed by Makita Authorized Service Centers, always
using Makita replacement parts.

ACCESSORIES

CAUTION:

•

These accessories or attachments are
recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons. Only use accessory or
attachment for its stated purpose.

If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.

•

Various type of Makita genuine batteries and
chargers

•

Saw chain

•

Scabbard

•

Guide bar complete

•

File

•

Battery adaptor (Prohibited use during the working
on the tree)

•

Arm cord hook (to be used together with the battery
adapter)

•

Tool bag

1. Brush holder cap
2. Screwdriver

«
...
13
14
15
16
»

Содержание BUC250C

















Отзывы:

Нет отзывов