Makita BTW103, Инструкция по эксплуатации, Страница: 7 / 12

7
To install the socket, push it onto the anvil of the tool
until it locks into place.
To remove the socket, simply pull it off.
2. For socket with O-ring and pin
1
2
3
013666
Move the O-ring out of the groove in the socket and
remove the pin from the socket. Fit the socket onto the
anvil of the tool so that the hole in the socket is aligned
with the hole in the anvil. Insert the pin through the hole
in the socket and anvil. Then return the O-ring to the
original position in the socket groove to retain the pin.
To remove the socket, follow the installation procedures
in reverse.
OPERATION
CAUTION:
•
Hold the tool firmly and place the socket over the
bolt or nut. Turn the tool on and fasten for the
proper fastening time.
•
If the tool is operated continuously until the battery
cartridge has discharged, allow the tool to rest for
15 minutes before proceeding with a fresh battery.
The proper fastening torque may differ depending upon
the kind or size of the bolt, the material of the workpiece
to be fastened, etc. The relation between fastening
torque and fastening time is shown in the figures.
Standard bolt BTW073
N m
Fastening time
Seconds
Fastening torque
.
60
40
20
0
0 0.5 1
1.5
M10
(M10)
M8
M6
(M8)
(M6)
M12
(M12)
013699
N m
Fastening time
Seconds
Fastening torque
.
High tensile bolt BTW073
70
60
50
40
30
20
10
0
0 1 2 3
(M10)
M10
M8
(M8)
M6
(M6)
013697
0.5
(M6)
60
40
20
0
N m
Fastening time Seconds
Fastening torque
.
Standard bolt BTW103
M10
(M10)
M8
(M8)
M6
1.5 1.0 0
70
M12
(M12)
013703
120
100
80
60
40
20
0
1 2
N m
Fastening time Seconds
Fastening torque
.
High tensile bolt BTW103
M10
(M10)
M8
(M8)
0
013701
1. Socket
2. O-ring
3. Pin