![background image](http://html1.mh-extra.com/html/makita/btm50/btm50_instruction-manual_4246301005.webp)
5
ENGLISH
(Original instructions)
Explanation of general view
1
Button
2
Red indicator
3
Battery cartridge
4
Star marking
5
Slide switch
6
Dial
7
Front lamp
8
Indication lamp
9
Application tool installation bolt
10 Holes in the application tool
11 Protrusions of the tool flange
12 Hex wrench
13 Tighten
14 Adapter (required for some
application tools)
15 Nozzle band
16 Dust nozzle
17 Dust attachment
18 Felt ring
19 Pad
20 Holes in the tool
21 Protrusions on the nozzle band
SPECIFICATIONS
• Due to our continuing programme of research and
development, the specifications herein are subject to
change without notice.
• Specifications and battery cartridge may differ from
country to country.
• Weight, with battery cartridge, according to EPTA-Pro-
cedure 01/2003
ENE080-1
Intended use
The tool is intended for sawing and cutting wood, plastic,
gypsum, non-ferrous metals, and fastening elements (e.
g. unhardened nails and staples). It is also intended for
working soft wall tiles, as well as dry sanding and scrap-
ing of small surfaces. It is especially for working close to
edge and flush cutting.
GEA010-1
General Power Tool Safety Warnings
WARNING Read all safety warnings and all
instructions.
Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future refer-
ence.
GEB094-2
CORDLESS MULTI TOOL SAFETY WARNINGS
1.
This power tool is intended to function for saw-
ing, cutting, grinding and sanding. Read all
safety warnings, instructions, illustrations and
specifications provided with this power tool.
Failure to follow all instructions listed below may
result in electric shock, fire and/or serious injury.
2.
Hold power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring.
Cutting
accessory contacting a “live” wire may make
exposed metal parts of the power tool “live” and
could give the operator an electric shock.
3.
Use clamps or another practical way to secure
and support the workpiece to a stable platform.
Holding the work by hand or against your body
leaves it unstable and may lead to loss of control.
4.
Always use safety glasses or goggles. Ordinary
eye or sun glasses are NOT safety glasses.
5.
Avoid cutting nails. Inspect workpiece for any
nails and remove them before operation.
6.
Hold the tool firmly.
7.
Make sure the application tool is not contacting
the workpiece before the switch is turned on.
8.
Keep hands away from moving parts.
9.
Do not leave the tool running. Operate the tool
only when hand-held.
10. Always switch off and wait for the blade to come
to a complete stop before removing the blade
from the workpiece.
11. Do not touch the application tool or the work-
piece immediately after operation; they may be
extremely hot and could burn your skin.
12. Do not operate the tool at no-load unnecessarily.
13. Always use the correct dust mask/respirator for
the material and application you are working
with.
Model
BTM40
BTM50
Oscillation per minute
6,000 – 20,000 (min
–1
)
Oscillation angle, left/right
1.6° (3.2° total)
Overall length
324 mm
Net weight
without dust extraction attachment
1.9 kg
2.0 kg
with dust extraction attachment
2.0 kg
2.1 kg
Rated voltage
D.C. 14.4 V
D.C. 18 V
Содержание BTM50
