[3] DISASSEMBLY/ASSEMBLY
[3]-1. Hammer case complete
DISASSEMBLING
Fig. 2
Fig. 3
Fig. 4
Fig. 6
Fig. 7
Fig. 5
(1) Twist and remove Bumper with slotted screwdriver. (
Fig. 2
)
(2) While releasing the hooks of Hammer case cover from Hammer case complete carefully, remove Hammer case
cover. (
Fig. 3
)
(3) Unscrew two 3x16 Tapping screws on Rear cover and remove Rear cover. (
Fig. 4
)
(4) Unscrew eight 3x16 Tapping screws on Housing set (R) and then remove Housing set (R). (
Fig. 5
)
(5) Remove an assembled part consists of three sections from Housing set (L). (
Fig. 6
)
(6) Pull out Hammer section from the other sections. (
Fig. 7
)
Rear cover
Bumper
hook of Hammer
case cover
hook of Hammer
case cover
Hammer
case complete
Slotted screwdriver
Slotted screwdriver
3x16 Tapping
screw (2pcs.)
3x16 Tapping
screw (8pcs.)
Housing set (R)
Housing
set (L)
Hammer section
An assembled part consists
of three sections.
Motor section
Brush holder section
Motor section
Brush holder section
Hammer section
P
3
/ 1
1
R
epair
