R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -3. Hammer Section (cont.)
DISASSEMBLING
(4) Now Hammer section is disassembled as drawn in
Fig. 12
.
Flat washer 12
Pin 5
Spindle
Spur gear 22
Hammer
Flat washer 24
Compression
spring 24
Cup washer 14
Steel ball 3.5
(24 pcs.)
Spindle section
1. Hammer section can now be disassembled as shown below.
2. After removing Flat washer 24,
Steel balls 3.5 can be removed
from Hammer.
Fig. 12
Fig. 13
Hammer
Assemble in the reverse order of Disassembly. (Refer to
Figs. 12
,
11 and 10
)
Note in Assembling:
Before putting Flat washer 24 in Hammer, make sure that twenty-four Steel balls 3.5 are put in the groove of Hammer
as shown in
Fig. 13
.
ASSEMBLING
Hammer and Steel balls 3.5,
viewed from above
Hammer
Steel balls 3.5
There will appear a space equivalent to
one Steel ball 3.5 in the groove of Hammer
when twenty-four Steel balls 3.5 are put
in place.
P
8
/ 1
2
