Makita BTD104, Инструкция по эксплуатации

Страница: 9 / 16

9
1
2
013580
1. To install the bit, pull the sleeve in the direction of
the arrow and insert the bit into the sleeve as far
as it will go. Then release the sleeve to secure
the bit.
1
2
3
013581
2. To install the bit, pull the sleeve in the direction of
the arrow and insert the bit-piece and bit into the
sleeve as far as it will go. The bit-piece should be
inserted into the sleeve with its pointed end facing
in. Then release the sleeve to secure the bit.
To remove the bit, pull the sleeve in the direction of the
arrow and pull the bit out firmly.
NOTE:
•
If the bit is not inserted deep enough into the
sleeve, the sleeve will not return to its original
position and the bit will not be secured. In this
case, try re-inserting the bit according to the
instructions above.
OPERATION
[*1] Presetting number of impacts is impossible for more
than 200 impacts (4 seconds).
[*2] Fastening time includes when you pull the trigger
completely.
The proper fastening torque may differ depending upon
the kind or size of the screw/bolt, the material of the
workpiece to be fastened, etc. The relation between
fastening torque, fastening time and number of impacts
(presetting number) is shown in the figures.
Hold the tool firmly and place the point of the driver bit
in the screw head. Apply forward pressure to the tool to
the extent that the bit will not slip off the screw and turn
the tool on to start operation.
20
1 5
10
5
0
0 0 .5 1 1 .5 2
M8
( M8 )
M6
( M6 )
Standard bo l t BTD 0 44
N m
F
asten
i
ng
tor
q
ue
.
2 5
M 10
M 10
F asten i ng t i me Seconds
N umber of i mpacts
(Presett i ng number)
29
(1 3 )
58
(2 5 )
* 1
* 2
013718
N m
F asten i ng t i me Seconds
F
asten
i
ng
tor
q
ue
Hi gh tens il e bo l t BTD 0 44
.
20
1
8
1 6
1 4
12
10
8
6
4
2
0
0
1
2
M6
( M6 )
N umber of i mpacts
(Presett i ng number)
58
(2 5 )
11 6
( 5 0)
* 1
* 2
013717
1. Sleeve
2. Bit-piece
3. Bit
1. Sleeve
2. Bit