F
eatures and benefits
P 3 / 10
Newly developed D-28 type motor
making a feature of
* Externally accessible carbon brush
* Replaceable armature
* High efficiency in cooling
* Yoke unit (field) made of rare earth
Indication lamp shows you the complete
or incomplete fastening of bolts or screws.
* Green lamp : complete fastening
* Red lamp : incomplete fastening
Slim shaped grip makes it
easy to grip even with gloved
hand, and small bosses are
molded on it for nonslip
operation
Assembled with machine
screws for easy removing
and repairing.
Magnesium alloyed hammer case
Easily operatable
variable speed control
switch
Automatic Blow-Stop System for prevention
of over tightening
The machine is to be stopped automatically
in accordance with the pre-set blowing
time.
<Note>
The required fastening torque (N.m) can not be
set with this system.
Push button type
reverse switch
Light and compact body
Model No.
BTD072
BTD072
Overall length Net weight
162mm
1.09 Kg
Rubber protector (optional accessory)
can be installed for protecting work piece
from the accidental scratch.
(Rubber protector)
Battery power warning lamp on B90117A
V
oltage
100
80
60
40
20
0
The condition of
power display lamp
The auto stop system functions.
This lamp informs of the battery power remaining
as per the diagram mentioned below.
And the machine is to be stopped automatically,
when the power remainder decreases to 20%.
Thus, the incomplete fastening is avoided.
Mod. ADP02 Refresh Adaptor
Because of the auto stop system, approx. 20%
of battery power always remains in battery cells,
which can be cause of battery's inactivity.
In order to avoid such trouble, the battery has
to be refreshed with refresh adaptor ADP02
every week.
