P
2
/
6
R
epair
[2] LUBRICATION
Put Makita grease N. No.1 into the gear room indicated by the black triangle to protect parts and product from unusual
abrasion. See
Fig.1.
Fig.1
[1] NECESSARY REPAIRING TOOLS
Code No.
1R003
Retaining ring pliers ST-2N
1R026
Bearing setting pipe 16-8.2
1R208
90 degree set square
1R232
Pipe 30
1R263
Bearing extractor
1R269
Bearing extractor
1R291
Retaining S & R pliers
Triangular rule
1R340
Bearing retainer wrench
Removing / Mounting Retaining ring
Removing Spur gear 52
Setting Saw blade at 90 degrees to Base plate
Holding Bearing box when removing Spur gear 52
Removing Bearing box
Removing Ball bearings
Removing / Mounting Retaining ring
Adjusting Saw blade to Base complete at 45 degrees
Removing / Mounting Bearing retainer
Descriptions
Use for
Item No. Descriptions
Portion to lubricate
Spur gear 52
Bearing box
31
31
Blade case
Amount
Gear room
6g
60
60
Depth guide
Contact surface with Flat washer 6
Contact surface with Head portion of M6x90 Flat head screw
a little
[3] Replacing Base complete
Fig. 2
Fig. 3
1. Loosen M5x6 Hex socket head set screw for fixing Depth guide to Base complete. (
Fig.2
)
Loosen Lever 40 and remove Flat washer 7 and Shoulder pin 6-7 for connecting Depth guide and Base complete. (
Fig.3
)
Base complete
Hex. wrench
M5x6 Hex socket
set screw
M5x6 Hex socket
set screw
Shoulder pin 6-7
CAUTION: Remove Saw blade,
Inner flange, Outer flange, Hex socket head bolt
and
Battery cartridge from the machine for safety before repair/ maintenance !
Flat washer 7
Depth guide