R
epair
P 8 / 10
4) Assembling ball bearing 6001DDW installed in "spur gear 26 complete"
Assemble sleeve to new ball bearings 6001DDW by pressing it, and assemble retaining ring S-12 to sleeve.
And then, press them into spur gear 26. See Fig. 20.
Ball bearing 6001DD
Sleeve
Fig. 20
Spur gear 26
Retaining ring S-12
< 4 > Replacing ball bearing 6811LLB installed in internal gear 29
1) Remove stop ring WR-55 with No.1R003 retaining plier from internal gear 29. The, ball bearing 6811LLB
can be removed from internal gear 29 with hand. See Fig. 21.
< 5 > Replacing holder for action mode change
Ball bearing
6811LLB
Internal gear 29
Stop ring WR-55
Fig. 21
When assembling ball bearing 6811LLB, take reverse step of Fig. 21.
3) Remove holder from skirt. And apply grease
to the surface of new holder.
4) When assembling, install new holder, compression spring 4,
spring holder and knob. And assemble cap
by fastening it with pan head screw M4x12.
Cap
Pan head screw
M4x12
Knob,
Spring holder
Compression
spring 4
Holder
2) Detach cap. And then, remove pan head screw
M4x12, knob, spring holder and compression
spring 4 as illustrated in Fig. 22.
1) Install unit of internal gear 29 (including
ball bearing 6811LLB and stop ring WR-55)
in skirt.
Fig. 22
