3
ENGLISH (Original instructions)
Explanation of general view
1-1. Switch
4-1. Punch plate
4-2. Sandpaper
4-3. Guide
5-1. Velcro sandpaper
5-2. Base
6-1. Dust bag
7-1. Groove
7-2. Front fixing cardboard
7-3. Front side of paper dust bag
8-1. Claws
8-2. Upper part
9-1. Notch
9-2. Guide
11-1. Holding tab
12-1. Dust box
12-2. Dust nozzle
13-1. Latch
13-2. Dust nozzle
SPECIFICATIONS
Model
BO4555 BO4556 BO4558 BO4557
Pad size
112mm ×102mm
Orbits per minute (min
-1
) 14,000
Dimensions (L x W x H)
131 mm x 112 mm x 142 mm
131 mm x 112 mm x 141 mm
131 mm x 112 mm x 137 mm
Net weight
1.1 kg
1.2 kg
1.0 kg
Safety class
/II
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
ENE052-1
Intended use
The tool is intended for the sanding of large surface of
wood, plastic and metal materials as well as painted
surfaces.
ENF002-1
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated in accordance with European
Standard and can, therefore, also be used from sockets
without earth wire.
ENG905-1
Noise
The typical A-weighted noise level determined
according to EN60745:
Model BO4555
Sound pressure level (L
pA
) : 80 dB(A)
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
Model BO4556
Sound pressure level (L
pA
) : 82 dB(A)
Sound power level (L
WA
) : 93 dB(A)
Uncertainty (K) : 3 dB(A)
Model BO4557
Sound pressure level (L
pA
) : 76 dB(A)
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
Model BO4558
Sound pressure level (L
pA
) : 79 dB(A)
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
Wear ear protection
ENG900-1
Vibration
The vibration total value (tri-axial vector sum)
determined according to EN60745:
Model BO4555
Work mode : sanding metal plate
Vibration emission (a
h
) : 2.5 m/s
2
or less
Uncertainty (K) : 1.5 m/s
2
Model BO4556
Work mode : sanding metal plate
Vibration emission (a
h
) : 3.0 m/s
2
Uncertainty (K) : 1.5 m/s
2
Model BO4557,BO4558
Work mode : sanding metal plate
Vibration emission (a
h
) : 3.5 m/s
2
Uncertainty (K) : 1.5 m/s
2
ENG901-1
•
The declared vibration emission value has been
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
•
The declared vibration emission value may also be
used in a preliminary assessment of exposure.
