R
epair
P 3 / 9
<2> Removing and assembling blade case section
[1] Removing
Lock handle in the raised position by pushing in
stopper pin as illustrated in Fig.1.
Stopper pin
Fig.1
[2] Loosen the hex bolt holding center cover with
socket wrench (standard equipment) by turning it
counterclockwise as illustrated in Fig.2.
Fig.2
[3] Raise center cover and safety cover. Press shaft lock
to lock spindle. And then, remove hex flange head bolt
holding the saw blade with socket wrench by turning it
clockwise as illustrated in Fig.3.
Shaft lock
Safety cover
Center cover
Fig.3
[4] Remove safety cover section by loosening flat head screw M5
as illustrated in Fig.3, and dust nozzle from the machine.
Flat head screw M5
[5] Loosen hex socket head bolt M6x20 holding link plate
and hex socket head bolt M6x10 holding rod 16-100
as illustrated in Fig.4.
[6] Pull stopper pin while holding motor unit (motor housing, blade case
and handle set), and raise motor unit till it comes to out of effect
of torsion spring. And then, remove motor unit after taking off
rod 16-100.
Right side view
Link plate
Hex socket
head bolt M6x20
Lever
Arm
Front side view of
arm section
Stopper pin
Hex socket
head bolt M6x10
Arm
Lever
Stopper pin
Rod 16-100
Motor unit
Motor unit
Motor unit
Torsion spring
Fig.4
Fig.5
