background image

 

 

CALIFORNIA EMISSION CONTROL WARRANTY STATEMENT 

YOUR WARRANTY RIGHTS AND OBLIGATIONS 

 
The California Air Resources Board and Makita U.S.A., Inc. are pleased to explain the emission control system warranty 
on your 2000 and later Small Off-Road engine (herein “engine”).    In California, the engine must be designed, built and 
equipped to meet the State's stringent anti-smog standards Makita U.S.A., Inc. must warrant the emission control system 
on your engine for the periods of time described below, provided there has been no abuse, neglect or improper 
maintenance of your engine.    Your emission control system includes parts such as the carburetor and the ignition system.   
Also included may be hoses, connectors and other emission-related assemblies.    Where a warrantable condition exists, 
Makita U.S.A., Inc. will repair your engine at no cost to you including diagnosis, parts and labor. 
 

MANUFACTURER'S WARRANTY COVERAGE: 

The 2000 and later engines are warranted for two (2) years.  If any emission-related part on your engine is 
defective, the part will be repaired or replaced by Makita U.S.A., Inc. 

 

OWNER'S WARRANTY RESPONSIBILITIES: 

- As the engine owner, you are responsible for the performance of the required maintenance listed in your Owner's 

Manual.    Makita U.S.A., Inc. recommends that you retain all receipts covering maintenance on your engine, but 
Makita U.S.A., Inc. cannot deny warranty solely for the lack of receipts or for your failure to ensure the 
performance of all scheduled maintenance. 

 
- As the engine owner, your should however be aware that Makita U.S.A., Inc. may deny you warranty coverage if 

your engine or a part has failed due to abuse, neglect, improper maintenance or unapproved modifications. 

 
- You are responsible for presenting your engine manufactured by Makita U.S.A., Inc. to a dealer, distributor or 

warranty station authorized by Makita Factory Service Center which is the U.S. importer and/or OEM of the 
Small Off-Road/engine as soon as a problem exists.    The warranty repairs should be completed in a reasonable 
amount of time, not to exceed 30 days. 

 

If you have any questions regarding your warranty rights and responsibilities, you should contact Makita Factory 
Service Center nearest you. 

 
 

Makita Factory Service Center 

 

Address Phone 

NO. 

14930 Northam Street   
La Mirada, CA 90638-5753 

(714) 522-8088 

41850 Christy Street   
Fremont, CA 94538-5107 

(510) 657-9881 

1421N. Clovis Ave., Ste. 112   
Fresno, CA 93727 

(209) 252-5166 

4554 Roseville Rd., Ste E   
North Highlands, CA 95660 

(916) 331-6211 

392 S. Arrowhead Ave., #A-1   
San Bernardino, CA 92408 

(909) 885-1289 

7674 Clairemont Mesa Blvd.   
San Diego, CA 92111 

(619) 278-4471 

333 Littlefield Ave.   
S.San Francisco, CA 64080 

(415) 875-1002 

1714 E McFadden Ave., Unit M   
Santa Ana, CA 92705 

(714) 667-5066 

16735 Saticoy St., Ste. 105   
Van Nuys, CA 91406 

(818) 782-2440 

 

20

Содержание BHX2500


























Отзывы: