R
epair
P 4 / 7
< 4 > Disassembling the trigger section.
< 5 > Assembling the magazine section.
( 1 ) Remove spring pin 3-28 of No.1 and then, the same of No.2. See Fig. 6.
( 2 ) Remove the following parts from housing. See Fig. 6.
* Trigger valve case
* Trigger valve stem
* Compression spring 3
* Pilot valve
( 3 ) Unscrew 4 pcs. of hex socket head bolts M6x25 and separate top cap and top cap gasket from housing.
And then, remove trigger valve guide as illustrated in Fig. 7.
No.1 Spring
pin 3-28
No.2 Spring
pins 3-28
Trigger
Fig. 6
Fig. 7
Fig. 8
Trigger valve case
Trigger valve stem
Compression spring 3
Pilot valve
Hex socket head
bolts M6x25
Top cap
Trigger valve guide
Thin bar
Top cap
gasket
Pusher lever
Magazine
( 1 ) Mount pusher lever to magazine. Push pusher lever in the direction shown with the black arrow,
and insert a bar into the hole of magazine to hold the pusher lever for easy assemble of
the magazine section. See Fig. 8.
a Bar
