[4] DISASSEMBLY/ASSEMBLY
[4]-1. Driver complete
DISASSEMBLING
Remove Driver complete and O rings in the order of Figs. 4 to 8.
ASSEMBLING
Take the disassembling step in reverse.
Note: 1) Apply Lubricant to O rings and fit them into each groove on Driver complete and Top cap. (Fig. 8)
2) Insert the round shape of Driver complete on the bottom of Cylinder, and face the vertical groove of Driver
complete to magazine, then set the assembled part in place as illustrated in Fig. 9.
Hex portion of Top cap
Pull off Top cap cover
by hand.
Fix the hex portion of Top cap
with vise. And turn the machine
counterclockwise.
Top cap can be removed.
Vise
Top cap
cover
Top cap
Rear cushion
Rear Cushion is removed.
Remove O Rings.
Pull off Cylinder together with Driver complete.
Remove Driver complete from Cylinder.
Housing set
Housing set
Cylinder
Cylinder
Driver complete
Fig. 4
Fig. 5
Fig. 6
Fig. 7
vertical groove of
Driver complete
Face the vertical groove of Driver complete
to Magazine.
Cylinder
Fig. 8
O ring 31
O ring 14
Top cap
Driver complete
P 5/ 14
R
epair
Magazine
round shape
of Driver
complete
Fig. 9
