5
Fig.5
The use of a dust collector makes sanding operations
clean and dust collection easy. To connect a dust
collector, open the dust port by sliding the cover plate
up and in a clockwise direction. Attach the joint onto the
dust port. Now a dust collector can be connected to this
tool.
CAUTION:
•
When not using a dust collector, close the dust
port opening with the cover plate.
OPERATION
Fig.6
Hold the tool firmly with both hands on the handle and
the grip in front. Place the tool on the workpiece surface
and move the tool gently forward and backward while
applying slight downward pressure.
CAUTION:
•
The tool should not be in contact with the
workpiece surface when you turn the tool on or off.
Damage to the tool or the workpiece surface and
injury to the operator may result.
•
Apply slight downward pressure only. Excessive
pressure may decrease tool efficiency, shorten
wheel service life and possibly gouge the
workpiece surface.
MAINTENANCE
CAUTION:
•
Always be sure that the tool is switched off and
unplugged before attempting to perform inspection
or maintenance.
•
Never use gasoline, benzine, thinner, alcohol or
the like. Discoloration, deformation or cracks may
result.
Replacing carbon brushes
Fig.7
Remove and check the carbon brushes regularly.
Replace when they wear down to the limit mark. Keep
the carbon brushes clean and free to slip in the holders.
Both carbon brushes should be replaced at the same
time. Use only identical carbon brushes.
Use a screwdriver to remove the brush holder caps.
Take out the worn carbon brushes, insert the new ones
and secure the brush holder caps.
Fig.8
To maintain product SAFETY and RELIABILITY, repairs,
any other maintenance or adjustment should be
performed by Makita Authorized Service Centers,
always using Makita replacement parts.
OPTIONAL ACCESSORIES
CAUTION:
•
These accessories or attachments are
recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons. Only use accessory or
attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
•
Nylon brush wheel
•
Slit paper wheel 120 - 40
•
Wire brush wheel 120
•
Cotton buff wheel 120
•
Joint
•
Hex wrench
NOTE:
•
Some items in the list may be included in the tool
package as standard accessories. They may differ
from country to country.
