P 9/ 14
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3]-3. Switch lever
DISASSEMBLING
ASSEMBLING
Assemble Switch knob to Switch lever as drawn in
Fig. 12
.
(1) Separate Rear cover
as per the left drawing in
Fig. 2
.
(2) Disassemble Switch lever as drawn in
Fig. 11
.
Fig. 11
Fig. 12
3. While bending Switch lever carefully,
pull it out from Motor housing.
1. Insert 1R283 into the space between
Switch knob and the rib of Motor housing
to prevent Switch knob from moving,
and push Switch lever strongly toward
Switch-on position.
2. The linkage of Switch knob
is disconnected from
Switch lever, and therefore,
Switch knob is removed.
Switch Lever
Tumbler
Switch Lever
1R283
Rib of Motor housing
Switch knob
Switch
Switch
Switch Knob
Tumbler of
Switch
Tumbler of
Switch
Switch Lever
Switch
knob
2. Engage Switch Knob’s hook
with the framed portion of
Switch lever while seeing
through the Switch knob
assemble hole.
3. Release Switch lever.
So, Switch knob is assembled
to Switch lever.
Switch Lever
Switch
knob
1. Insert Switch lever into Motor housing
until the frame of Switch lever can be
seen through Switch knob assemble hole.
And keep this position to assemble
Switch knob.
