SPECIFICATIONS
Model
9540
9541
9542
Depressed center wheel diameter ................................... 100 mm
115 mm
125 mm
Spindle thread .................................................................. M10
M14
M14
No load speed (min
-1
) ...................................................... 10,000
10,000
10,000
Overall length ................................................................... 305 mm
305 mm
305 mm
Net weight ........................................................................ 1.7 kg
1.7 kg
1.7 kg
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Note: Specifications may differ from country to country.
Power supply
The tool should be connected only to a power supply of the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They are double-insulated in accordance with European
Standard and can, therefore, also be used from sockets without earth wire.
Safety hints
For your own safety, please refer to the enclosed safety instructions.
For European countries only
Noise and Vibration of Model 9541
The typical A-weighted noise levels are
sound pressure level: 88 dB (A)
sound power level: 101 dB (A)
– Wear ear protection. –
The typical weighted root mean square acceleration
value is not more than 2.5 m/s
2
.
Noise and Vibration of Model 9542
The typical A-weighted noise levels are
sound pressure level: 88 dB (A)
sound power level: 101 dB (A)
– Wear ear protection. –
The typical weighted root mean square acceleration
value is not more than 2.5 m/s
2
.
EC-DECLARATION OF CONFORMITY
The undersigned, Yasuhiko Kanzaki, authorized by
Makita Corporation, 3-11-8 Sumiyoshi-Cho, Anjo,
Aichi 446-8502 Japan declares that this product
(Serial No. : series production)
manufactured by Makita Corporation in Japan is in
compliance with the following standards or standard-
ized documents,
HD400, EN50144, EN55014, EN61000
in accordance with Council Directives, 73/23/EEC,
89/336/EEC and 98/37/EC.
Yasuhiko Kanzaki
CE 94
Director
MAKITA INTERNATIONAL EUROPE LTD.
Michigan Drive, Tongwell, Milton Keynes,
Bucks MK15 8JD, ENGLAND
9540 (cover) (’100. 12. 26)
2
