3. Exchange of Spiral bevel gear 10
1) According to the exchange way of Armature in the abov e 2, take out Armature.
2) Make Armature nipped by Vise lightly, wrap it by rag to prevent from damage,nip the wrapped by plier , and loose n
Screw.
Armature axis and Inside of Gear are fixed by Right -handed screw (normal screw), and Gear is screwed directly to
Armature
3) In installing Gear, be sure to screw surely in the same way as 2)
4. Exchange of Spiral bevel gear 38
1) Remove Wheel and Wheel cover respectively.
2) Remove Screw M4x16 fixing Bearing box complete by Driver.
3) Spiral bevel gear 38 is just press-fit in Spindle. D isassemble and assemble as shown in the illustration below.
Loosen
Tighten
Wrap by rag and nip by Plier
Insert lightly in Vise
Press Spindle end face by Arbor press of 15" or more
Existing Ring
70more
12more
Wrap by rag
Disassembly
Assembly
Ø23~
Ø25
Ø14
