R
epair
1. Replacing Spiral bevel gear (in replacing, if there is a trouble in Ball bearing, it should be replaced too)
1) Remove Depressed center wheel and Wheel cover.
2) Remove Tapping screw CT5x16 fixing Bearing box.
2. Assembling of Bearing box
When assembling, be careful so that grease may not stick to Tapping screw bind CT5x16.
Disassemble or assemble as the following illustrations;
IR 217
Height: 15mm(5/8")
or more
Spiral Bevel Gear 49
for 9067/9067S
Spiral Bevel Gear 50
for 9069/9069S/9067L
Inside diameter
20mm or more
Bearing box
IR030
Labyrinth ring
Press-fit deeply being
careful not to damage it
Outside diameter
40mm or less
Disassemblig
Assembling
Press Spindle
by Arbor press
Receive Ring using U
part of Arbor press
Ø23~25mm
Ø65mm or more
Ø17.2mm
Tapping screw bind CT5x16