![background image](http://html.mh-extra.com/html/makita/8450/8450_instruction-manual_225016004.webp)
4
ENGLISH
Explanation of general view
1
Grip base
2
Side grip
3
Chuck
4
Chuck key
5
Depth gauge
6
Switch trigger
7
Lock button
8
Reversing switch lever
9
Action mode changing button
10 Ring
11 Sleeve
SPECIFICATIONS
Model
8450 8451
8452
Capacities
Metal ...................................................... 13 mm
13 mm
13 mm
Wood ...................................................... 25 mm
25 mm
25 mm
Concrete ................................................. 15 mm
15 mm
15 mm
No load speed (min
–1
) .............................. 0 – 2,800
0 – 2,800
2,800
Blows per minute ...................................... 0 – 44,800
0 – 44,800
44,800
Overall length ............................................ 299 mm
299 mm
299 mm
Net weight ................................................. 1.7 kg
1.7 kg
1.7 kg
• Due to our continuing program of research and
development, the specifications herein are subject
to change without notice.
• Note: Specifications may differ from country to
country.
Power supply
The tool should be connected only to a power supply
of the same voltage as indicated on the nameplate,
and can only be operated on single-phase AC supply.
They are double-insulated in accordance with Euro-
pean Standard and can, therefore, also be used from
sockets without earth wire.
SAFETY INSTRUCTIONS
Warning! When using electric tools, basic safety
precautions should always be followed to reduce
the risk of fire, electric shock and personal injury,
including the following. Read all these instructions
before attempting to operate this product and save
these instructions.
For safe operation:
1.
Keep work area clean
Cluttered areas and benches invite injuries.
2.
Consider work area environment
Don’t expose power tools to rain. Don’t use power
tools in damp or wet locations. Keep work area well
lit. Don’t use power tools in presence of flammable
liquids or gases.
3.
Guard against electric shock
Prevent body contact with grounded surfaces (e.g.
pipes, radiators, ranges, refrigerators).
4.
Keep children away
Do not let visitors contact tool or extension cord. All
visitors should be kept away from work area.
5.
Store idle tools
When not in use, tools should be stored in dry,
high, or locked-up place, out of the reach of chil-
dren.
6.
Don’t force tool
It will do the job better and safer at the rate for
which it was intended.
7.
Use right tool
Don’t force small tools or attachments to do the job
of a heavy duty tool. Don’t use tools for purposes
not intended; for example, don’t use circular saw
for cutting tree limbs or logs.
8.
Dress properly
Do not wear loose clothing or jewelry. They can be
caught in moving parts. Rubber gloves and non-
skid footwear are recommendemd when working
outdoors. Wear protective hair covering to contain
long hair.
9.
Use safety glasses and hearing protection
Also use face or dust mask if cutting operation is
dusty.
10. Connect dust extraction equipment
If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used.
11. Don’t abuse cord
Never carry tool by cord or yank it to disconnect it
from receptacle. Keep cord from heat, oil and
sharp edges.
12. Secure work
Use clamps or a vise to hold work. It’s safer than
using your hand and it frees both hands to operate
tool.
13. Don’t overreach
Keep proper footing and balance at all times.
14. Maintain tools with care
Keep tools sharp and clean for better and safer
performance. Follow instructions for lubricating and
changing accessories. Inspect tool cords periodi-
cally and, if damaged, have repaired by authorized
service facility. Inspect extension cords periodically
and replace if damaged. Keep handles dry, clean
and free from oil and grease.
Содержание 8450
Страница 2: ...2 2 1 3 4 2 5 1 6 7 8 9 11 10 1 2 3 4 5 6 7 ...
Страница 23: ...23 23 23 ...
Страница 24: ...Makita Corporation Anjo Aichi Japan 884139A207 ...