P 2 / 8
R
epair
[2] LUBRICATION
[1] NECESSARY REPAIRING TOOLS
CAUTION: For safety before repair/maintenance;
1)Unplug machine. 2)Remove cutter chain, chain bar, Hex. bolt M10 and Washers.
Code No.
1R045
Gear extractor, large
1R275
Description
Use for
Type 94 field insert jig
1R308
Spring pin extractor 4.0
1R309
Spring pin extractor 5.0
Removing Sprocket 4
Removing 4.0mm diameter Spring pins
Removing 5.0mm diameter Spring pins
Removing 6.0mm diameter Spring pins
1R310
Spring pin extractor 6.0
Holding Sprocket 4 to unscrew Hex nut M10
See Fig. 1.
1. Apply 10g of Makita grease N No.1 for the teeth of Helical gear 47 and put some amount of Makita grease N No.1 on
the rubbing surfaces of Motor housing complete and Rotor holder for their smooth pivot action. Refer to marks.
2. Put a little amount of machine oil on Spring pin 5-40, two slide poles of Base complete, the threads of M14 Screw,
inside of Ring 9 and both sides of Sleeve 9 near Clamp lever, the inside of Sleeve 9 near Lever B complete, Slide bar
and Guide pole. Refer to marks.
3. Put a little amount of adhesive on the threads of M6x12 + Countersunk head screw for setting Ball bearing 1008LL to
Chain bar. Refer to marks.
Fig. 1
Ring 9: Inside
Sleeve 9: Inside and outside
Clamp lever
Guide pole
Slide bar
Lever B complete
Sleeve 9: Inside
Chain bar
Spring pin 5-40
Rotor holder
Helical gear 47
Slide poles of Base complete
Screw M14
Motor housing
complete
Ball bearing
1008LL
+ Countersunk
head screw M6x12
Makita grease N No.1 (Part No. 042017-7A, 2.5kg/set)
Machine oil
Adhesive: 0.12g Three bond 1342
(Makita Neji lock super TB1342:
Part No. 045017-6A)
