background image

3

SAVE THESE INSTRUCTIONS

Work Area

1.

Keep your work area clean and well lit.

Cluttered benches and dark areas invite acci-
dents.

2.

Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases, or dust.

 Power

tools create sparks which may ignite the dust
or fumes.

3.

Keep bystanders, children, and visitors
away while operating a power tool.

 Distrac-

tions can cause you to lose control.

Electrical Safety

4.

A battery operated tool with integral bat-
teries or a separate battery pack must be
recharged only with the specified charger
for the battery.

 A charger that may be suit-

able for one type of battery may create a risk
of fire when used with another battery.

5.

Use battery operated tool only with specif-
ically designated battery pack.

 Use of any

other batteries may create a risk of fire.

Personal Safety

6.

Stay alert, watch what you are doing, and
use common sense when operating a
power tool. Do not use tool while tired or
under the influence of drugs, alcohol, or
medication.

 A moment of inattention while

operating power tools may result in serious
personal injury.

7.

Dress properly. Do not wear loose cloth-
ing or jewelry. Contain long hair. Keep
your hair, clothing, and gloves away from
moving parts. 

Loose clothes, jewelry, or long

hair can be caught in moving parts.

8.

Avoid accidental starting. Be sure switch
is in the locked or off position before
inserting battery pack.

 Carrying tools with

your finger on the switch or inserting the bat-

tery pack into a tool with the switch on invites
accidents.

9.

Remove adjusting keys or wrenches
before turning the tool on.

 A wrench or a

key that is left attached to a rotating part of
the tool may result in personal injury.

10.

Do not overreach. Keep proper footing
and balance at all times.

 Proper footing and

balance enable better control of the tool in
unexpected situations.

11.

Use safety equipment. Always wear eye
protection.

 Dust mask, non-skid safety

shoes, hard hat, or hearing protection must
be used for appropriate conditions.

Tool Use and Care

12.

Use clamps or other practical way to
secure and support the workpiece to a
stable platform.

 Holding the work by hand or

against your body is unstable and may lead
to loss of control.

13.

Do not force tool. Use the correct tool for
your application.

 The correct tool will do the

job better and safer at the rate for which it is
designed.

14.

Do not use tool if switch does not turn it
on or off.

 A tool that cannot be controlled

with the switch is dangerous and must be
repaired.

15.

Disconnect battery pack from tool or
place the switch in the locked or off posi-
tion before making any adjustments,
changing accessories, or storing the tool.

Such preventive safety measures reduce the
risk of starting the tool accidentally.

16.

Store idle tools out of reach of children
and other untrained persons.

 Tools are

dangerous in the hands of untrained users.

17.

When battery pack is not in use, keep it
away from other metal objects like: paper
clips, coins, keys, nails, screws, or other

Содержание 6313D





















Отзывы: