C
ircuit diagram
W
iring diagram
P
8
/
8
Switch
Polyethylene tube
Field
Fig. D-1
Fig. D-2
Fig. 29
Power supply cord
Color index of lead wires' sheath
Black
White
The assembled angle of Lever plate and Base has to be adjusted in the zone
from 40 degrees to 70 degrees as illustrated in Fig. 29 when blade angle to
Base is set at 90 degrees.
The assembled angle of Lever plate and Depth guide has to be adjusted in
the zone from 0 degree to 30 degrees as illustrated in Fig. 28.
Fig. 28
70 degrees
40
degrees
30
degrees
Lever plate
Base
Lever plate
[11] ADJUSTMENT IN POSITION OF LEVER PLATE FOR ANGULAR GUIDE
[10] ADJUSTMENT IN POSITION OF LEVER PLATE FOR DEPTH GUIDE
Rib
Pin
Polyethylene Tube for bundling field lead wires
Fix the lead wires into
the lead wire holders.
Inflect the connecting terminal
so that it does not interfere with
the wiring of lead wires.
Route the field lead wires between
rib and the wall of Handle set.
Route the field lead wires
between pin and the wall
of handle set to keep the
polyethylene tube in the
illustrated position.
Power Supply Cord
Switch