![background image](http://html.mh-extra.com/html/makita/5477nb/5477nb_instruction-manual_230163006.webp)
6
Fig. 1
000147
Fig. 2
000150
20.
Before setting the tool down after completing
a cut, be sure that the lower guard has closed
and the blade has come to a complete stop.
21.
Never attempt to saw with the circular saw
held upside down in a vise. This is extremely
dangerous and can lead to serious accidents.
000029
22.
Some material contains chemicals which may
be toxic. Take caution to prevent dust
inhalation and skin contact. Follow material
supplier safety data.
23.
Do not stop the blades by lateral pressure on
the saw blade.
24.
Always use blades recommended in this
manual. Do not use any abrasive wheels.
25.
Keep blade sharp and clean.
Gum and wood
pitch hardened on blades slows saw and
increases potential for kickback. Keep blade clean
by first removing it from tool, then cleaning it with
gum and pitch remover, hot water or kerosene.
Never use gasoline.
26.
Wear a dust mask and hearing protection
when use the tool.
SAVE THESE INSTRUCTIONS.
WARNING:
MISUSE or failure to follow the safety rules stated in
this instruction manual may cause serious personal
injury.
USD201-2
Symbols
The followings show the symbols used for tool.
・
volts
・
amperes
・
hertz
・
alternating
current
・
no
load
speed
・
Class II Construction
・
revolutions or reciprocation per minute
FUNCTIONAL DESCRIPTION
CAUTION:
•
Always be sure that the tool is switched off and
unplugged before adjusting or checking function on
the tool.
Adjusting depth of cut
1
009224
1. Lever
Содержание 5477NB
Страница 31: ...31 ...