Makita 5402, Инструкция по эксплуатации

Страница: 2 / 12

2
SPECIFICATIONS
• Due to our continuing programme of research and development, the specifications herein are subject to change
without notice.
• Note: Specifications may differ from country to country.
Symbols END101-1
The following show the symbols used for the tool. Be
sure that you understand their meaning before use.
...................Read instruction manual.
.....................Wear safety glasses.
Intended use
The tool is intended for performing lengthways and
crossways straight cuts and mitre cuts with angles in
wood while in firm contact with the workpiece.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. This
tool should be grounded while in use to protect the oper-
ator from electric shock. Use only three-wire extension
cords which have three-prong grounding-type plugs and
three-pole receptacles which accept the tool’s plug.
Model 5402
Blade diameter 415 mm
Max. Cutting depth
at 90° 157.5 mm
at 45° 106 mm
No load speed (min
-1
)
2,200
Overall length 615 mm
Net weight 14 kg