![background image](http://html.mh-extra.com/html/makita/5044kb/5044kb_instruction-manual_231956013.webp)
13
Use a screwdriver to remove the brush holder caps. Take out
the worn carbon brushes, insert the new ones and secure
the brush holder caps.
After replacing brushes, plug in the tool and break in brushes
by running tool with no load for about 10 minutes. Then
check the tool while running and electric brake operation
when releasing the switch trigger. If electric brake is not
working well, ask your local Makita service center for repair.
To maintain product SAFETY and RELIABILITY, repairs, any
other maintenance or adjustment should be performed by
Makita Authorized or Factory Service Centers, always using
Makita replacement parts.
ACCESSORIES
CAUTION:
•
These accessories or attachments are recommended for
use with your Makita tool specified in this manual. The
use of any other accessories or attachments might
present a risk of injury to persons. Only use accessory
or attachment for its stated purpose.
If you need any assistance for more details regarding these
accessories, ask your local Makita service center.
•
For fiber-cement board saw blades
•
Rip fence (Guide rule)
•
Hex wrench 5
1. Brush holder cap
2. Screwdriver
1
2
001519
Carbide-tipped
Specifically designed to professionally cut
fiber-cement siding, roofing and backerboard.
Содержание 5044KB
Страница 14: ...Memo 14 ...
Страница 15: ...Memo 15 ...
Страница 16: ...Memo 16 ...
Страница 17: ...17 Fold Cut Stamp Timbre Makita Canada Inc 1950 Forbes Street Whitby Ontario L1N 7B7 ...