R
epair P 5 / 16
3.Slide pin 4 in order to disconnect rod with slider. And then, pull out rod from gear housing cover.
Disassemble linear guides by unscrewing 4 ps. of pan head screws M4 x 10. So, leaf spring, pin 4 and slider can be
disassembled from gear housing cover. See Fig. 7.
Fig. 7
Rod
Pin 4
Slider
Pin 4
Slider
Linear guides
Linear guides
4 ps. of
Pan head
screws M4 x 10
Leaf spring
Gear housing
cover
The rolling portion has to be
faced to gear housing side.
Gear housing cover.
Leaf spring
2. Put leaf spring in gear housing cover, paying attention to its assembling direction as illustrated in Fig. 8.
And insert rod into gear housing cover, paying attention to the direction of hook of blade holder
as illustrated in Fig. 8A.
1. Assemble tool opener to gear housing cover with referring to Fig. 1A and Fig. 2 at page 3.
< 6 > Assembling gear housing cover section
Gear housing side
Tool opener
Rod
Blade
holder
Fig. 8
Fig. 8A
Blade holder's hook
Blade holder's hook has
to contact with tool opener,
when detaching the blade
with tool opener.
Blade holder
Gear housing cover
Tool opener
