P 4 / 6
R
epair
Fig. 8
Fig. 9
Fig. 10
[3] -2. Disassembling/ Assembling Gear Section and SJS (Clutch) Mechanism
Retaining ring S-15
Flat washer 15
1) Remove the Gear section by unscrewing four M5x14 Hex bolts. (Fig. 8)
2) Remove Ball bearing 6000LLB using Ball bearing extractor (Makita Part No.1R269). (Fig. 9)
3) Remove Retaining ring S-15 using Retaining ring S and R pliers (Makita Part No.1R291). Flat washer 15 can now be
removed. (Fig. 10)
4) See Fig. 11. Remove Spindle by pressing down from the Spiral bevel gear installation side using arbor press and Round
bar for arbor: Use a Round bar of 14mm or smaller.
Important: Be careful not to damage the Labyrinth ring 25 (The component of Spindle complete) in this step.
5) Remove the assembly of Spiral bevel gear 57 and Lock sleeve from Bearing box. (Fig. 12)
Fig. 11
Fig. 12
6) While turning Lock sleeve clockwise with water pump pliers, Lock sleeve can be separated from Spiral bevel gear 57
by pulling the gear. (Fig. 13)
7) While turning Lock spring 24 clockwise with water pump pliers, Lock spring 24 can be separated from Spiral bevel
gear 57 by pulling the gear . (Fig. 14)
Important: Wrap Lock spring 24 with soft cloth or the like in order not to damage with the pliers.
Water pump pliers
Water pump pliers
Lock sleeve
Fig. 13
Lock spring 24
Fig. 14
Soft cloth
Hex bolt M5x14 (4pcs)
Gear section
No.1R269
Ball bearing 6000LLB
No.1R291
Round bar for arbor
Spindle complete
Spiral bevel gear 57
Lock sleeve
Labyrinth ring 25
(The component of Spindle complete)
Bearing box
Spiral bevel gear 57
Spiral bevel gear 57
DISASSEMBLING
